E.
Use Screw M (#55) to fasten Wall-Hanging Brackets (#8).
Hang the unit on the Wall-Hanging Brackets (#8) as following pictures show.
Note:
The shop drawing shows the actual size of the Wall Cabinet (28" by 24")
and indicates the locations of the holes on the Wall-Hanging Brackets.
You may also want to temporarily tape the drawing to the wall for marking the
locations of the screws. Use a small nail to penetrate the shop drawing and
mark the eight points to fasten the Wall-Hanging Bracket.
After marking locations, pre-drill a small hole (1/4" diameter) at each of the
eight hole locations.
UltraHD® Wall Cabinet (Model No. 20209)
*NOTE: We recommend TWO people to assemble the cabinet.
*Drill a small hole (1/4" diameter) at both stud locations to ensure that
the hanging anchor is secured.
D.
To find the rest of the screw holes to fasten the Wall-Hanging Brackets,
please refer to the accompanying shop drawing. Place the shop drawing
on the wall, and align the holes in the drawing with those already drilled in
the wall.
Hang Wall Cabinet Wall-Hanging
Brackets
16"
#55
8
