TIP:
Step 1.
Step 2.
Note:
Step 3.
Note:
UltraHD® 3-Drawer Rolling Cabinet
(Model No. UHD20235)
*NOTE: We recommend using TWO people to assemble the cabinet.
A magnetic screwdriver is included for your
convenience. If using a powered driver, keep
torque setting on LOW.
Open the package, remove and place all parts to the
side. Then open the package of the Solid Hardwood
Top (#1).
Note: The Solid hardwood Top is packed within an
inner cardboard box.
Install Front Frame (#6)
Locate the Front Frame (#6) and attach to the
"Front" of the Solid Hardwood Top (#1), using 3 pcs
Screw A (#14) and Screwdriver (#21) to tighten.
1.
Make sure that the top and sides of the Front
Frame are flush with the Solid Hardwood Top (#1)
2.
Don't tighten screws completely.
Line up screw
holes then to tighten after installing side panels.
Install the Left Panel (#4)
a.)
Remove 2 pcs Sliders to create the space needed
to
use the screwdriver (#21). Then, attach the Left
Panel (#4) to the Front Frame (#6) and the Solid
Hardwood Top (#1). Make sure the “Top” of the
Left Panel (#4) is on the Solid Hardwood Top (#1)
and the screw holes are lined up to the Front Frame
(#6). Use Screwdriver (#21) and 6 pcs Screw A (#14)
to tighten the Left Panel (#4) to the Front Frame
(#6), and then to Solid Hardwood Top (#1).
Don't tighten screws completely which on Solid
Hardwood Top.
b.)
Re-install the removed 2 pcs Sliders to the
Left Panel (#4).
Front
Back
Front
Back
Remove 2pcs Slides to create the space needed
to use the Screwdriver (#21).
#1
#14
#4
#14
#6
#14
#4
#4
#4
6
Summary of Contents for UHD20235
Page 2: ...1...
