UltraHD® Wood Top Care
Our
solid wood
tops are made with real wood, and while great care is taken to ensure consistent top color
and graining,
there may be natural variations between finished products. We hand select the wood for every
workspace top
to
ensure the material is undamaged and naturally beautiful. If the wood top is received with
excessive damage
or splitting,
please contact Seville Customer Service for warranty assistance
. Variations of
color, and minor scratches in
the clear coat finish will not be reason for replacement.
Restore Shallow Scratches or Chips
The wood surface of this product is finished with a polyurethane coat. If the wood top becomes chipped or
scratched, additional clear polyurethane coats can be reapplied to restore a smooth texture and protect
from future damage.
Please follow the manufacturer's instruction on the product for application.
UltraHD®
Dual Motor
Electric Height
Adjustable Workbench (Model No. 20200)
*NOTE: We recommend using TWO people to assemble the workbench.
Get help with assembly and report damaged or missing parts.
Email:
Telephone:
1 (800) 323-5565
Hours (M-F):
8:30 AM - 4:30 PM (PST)
1
4
How to Reset
Press and HOLD the button until the workbench reaches it reaches the lowest height. Continue to press
and HOLD for about 5 seconds until you see a number (ie. 29.6) on the display AFTER it shows “rst” and makes
the “beep-beep” sound.
How to Adjust the Height
Press and HOLD either the or to adjust to your desired height of the workbench.
buttons
How to Save the
H
eight in Memory
There are 3 available memory heights you can save - 1, 2 & 3. Adjust the workbench to your desired height and
press the “S” button to display “S-“. Then press any of one the 1, 2 or 3 number button. When a memory is
saved, you will hear “beep-beep” sound. By repeating the same steps, you can save or override an old saved
memory with a new height.
How to Lock/Unlock the Controller
First adjust the workbench height to your desired lock height. Then press and HOLD the
and
together
for about 5 seconds until “Loc” is displayed. At this moment, the Controller is locked and the
buttons together for
workbench height
can’t be adjusted. In order to unlock, press and HOLD the
and
about 5 seconds until a
number (previously locked height) is displayed.
Post Setup Quick Start Instructions
