STEP 1. Turn the SIDE FRAMES (A) upside
down and set them a shelf-length apart.
Make sure support brackets on each frame
face each other.
STEP 2. Insert a SHELF (B) upside down in
the support brackets nearest the ground.
Line up the holes on the support brackets
and SHELF (B) and secure with SCREWS (F).
TIP: Setting SHELF (B) on your lap may
make it easier to align holes and screws.
Tighten SCREWS (F) until snug.
STEP 3. Repeat with second SHELF (B) and
turn unit over.
4B. Install STACKING PINS (D) to legs
when expanding an existing unit.
DO NOT
STACK MORE
THAN 3 UNITS
HIGH
Parts List
A. Side Frame (2)
B. Shelf (2)
C. Leveling Feet (4)
D. Stacking Pins (4)
E. Caps (4)
F. Screws (8)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at (800) 323-5565
or send an email to [email protected]
Assembly Instructions
4A. Install CAPS (E) and LEVELING
FEET (C) for freestanding use.
Required Tools
(not included)
Screwdriver
07-2017
