1
1
Use Instructions
DESK MUST BE INITIALIZED BEFORE FIRST USE
Up Arrow
Down Arrow
Memory
Save Memory
Display
USB Charging Port
Get help with assembly and report damaged or missing parts.
Email:
Telephone:
1 (800) 323-5565
Hours:
8:30 AM - 4:30 PM (PST)
Initialize & Reset
Once your desk has been put together or when reset (initialization) is necessary:
1). Press & Hold the
Down Arrow
until the desk reaches the lowest position and/or stops moving.
2). Release your finger from the
Down Arrow
momentarily and then Press & Hold again until:
(a). Screen is flashing “RSt”.
(b). Desk rebounds.
(c). You will hear a “DING” sound.
3). Release your finger and this completes the initialization/reset procedure.
Adjust Height
Press and hold the
Up Arrow
to lift.
Press and hold the
Down Arrow
to lower.
Save Height
To save the desired height, lightly tap the “
M
” button on the LED Control Panel, and an “
S-
“ will appear.
Now tap on any one of the 3
Memory Buttons
to successfully save and store the desired height.
Note
, If a flashing “
S-1
” appears on the LED Control Panel, this signifies that the “
M
” button was pressed for
too long. Wait for the system to reset itself, should take 5 seconds, and then start the above process over.
Recall Height
Press the desired memory button. The desk will then adjust to the stored height.
Limit
ed
Height
Setting
Control overall height limits of the desk to prevent the desk from going beyond a desired height level.
Press the
Up Arrow + Down Arrow
for 5 seconds until ding is heard.
Run to the limited height, press and hold
Up Arrow + Down Arrow
again for 5 seconds, when you hear the
ding sound, limited height canceled.
Child Safety Feature
Press the
M Up Arrow
for 5 seconds to lock the LED Control Panel and prevent the desk from
going up or down. LOC will display. Press the
M Down Arrow
for 5 seconds to unlock the LED
Control Panel.
