- 14 -
TV Function
Basic Operation
Connect the antenna to the antenna jack on the unit rear panel.
After connection, connect the power supply cord. If the player is in standby mode, press the
POWER button to turn on the power.
Press the SOURCE button to select the TV mode.
Press the
▼
、
▲ (direction buttons) on the remote control, or use the number buttons directly, to
select the channel that you wish to view.
You are recommended to take through the following steps when the device is for the first time in
operation.
General Setup
Press the LCD SETUP button three times repeatedly on the remote control to access the TV setup
menu and select correct color and sound system.
In this menu, use the
▼
、
▲
buttons to select items you want to set, press the
►
,
◄
buttons to select,
press the OK button to exit from the menu.
Language
Press the
►
,
◄
buttons to select the menu language.
Reset
Select RESET to resume the default status.
◆
Under TV mode, select “RESET” in setup menu, press the
►
button, then the multiple
Parameter set up in LCD setup menu will resume to the original status, but the SOUND will not be
reset.
Color
Use the
▼
、
▲
button to select Color item. Press the
►
,
◄ to select PAL, NTSC3
, NTSC4 and
SECAM.
Sound
Use the
▼
、
▲
button to highlight Sound item. Use the
►
,
◄
button to select B/G, M, L, D/K and “I”.
The sound system may be varied depending on the state the product soled.
GENERAL
►
LANGUAGE
ENGLISH
RESET
COLOR
PAL
SOUND
B/G