SEVERIN Smoothie Mix & Go, Instructions For Use Manual, Page: 11 / 56

11
the section Cleaning and care .
Short-term operation
The appliance is designed to process
average domestic quantities of food; it
can be operated without interruption for
a maximum of 3 minutes, after which it
should be allowed to cool down to room
temperature.
Safety switch
A special safety switch in the motor unit
ensures that the appliance cannot be
activated unless a blender jug has been
properly fi tted; otherwise, the motor will not
start when the jug is pushed down.
Operation
∙ Cut the ingredients into cubes of about 15
mm and put them into the blender jug.
∙ For best results, the following sequence
should be observed when putting the
ingredients into the jug:
1. liquids
2. fresh ingredients
3. frozen ingredients
4. yoghurt/ice-cream
∙ The jug has a maximum capacity of 600
ml.
∙ Screw the blade unit clockwise onto the
blender jug.
∙ Connect the appliance to the mains.
∙ Turn the jug upside down and fi t it to the
motor unit in such a way that the triangle
symbol on the blade unit is aligned with
the centre arrow mark on the motor unit.
∙ Pushing down on the jug activates the
pulse function; the motor runs until the
jug is released again.
∙ If the jug is pushed down and turned
clockwise to lock, the motor runs
continuously. To switch off, turn the jug
anti-clockwise to unlock and remove.
∙ Caution: Do not operate the appliance
when the blender jug is empty. Do not
fi ll it with dry items only, such as nuts,
almonds etc.
∙ If some residue sticks to the jug’s
sidewalls, remove the jug, shake it and let
it run through another brief pulse cycle.
∙ Remove the plug from the wall socket
after use. Wait until the motor has come
to a complete standstill before removing
the blender jug and unscrewing the blade
unit.
∙ Close the blender jug with the lid.
Cleaning and care
∙ Always remove the plug from the wall
socket before cleaning the appliance.
∙ To avoid the risk of electric shock, do
not clean the motor unit or power cord
in water, and do not immerse them. The
motor unit may be wiped with a slightly
damp, lint-free cloth.
∙ Do not use abrasives, harsh cleaning
solutions or hard brushes for cleaning,
and do not clean in a dishwasher.
∙ The blender jugs and blade unit can be
cleaned in warm, soapy water.
∙ To clean after use, the jug can also
be fi lled with approximately 400 ml
warm water and a mild detergent. Let
the appliance run for a short period
as described in the section Operation .
Remove the jug and shake if necessary.
Then rinse the jug and blade unit with
fresh water. All parts must me thoroughly
dried afterwards.
∙ The lids can be cleaned in warm, soapy
water.
∙ Do not put any parts in a dishwasher.