14
Intended use
∙
This appliance must only be used for
cooking food. Any other use must be
considered improper and may lead to
personal injuries or material damage.
∙
Unlike conventional deep-fryers, this
appliance is not intended to be used with
oil or fat.
Before using for the
fi
rst time
∙
Before using the appliance for the
fi
rst
time, remove any remaining packaging
materials and stickers.
∙
Heat the appliance for 15 minutes to
200 °C without any food. This will lessen
the inherent smell of the appliance (see
Using the manual temperature / time
selection
).
∙
Ensure adequate ventilation by opening
windows or balcony doors.
∙
Clean the appliance afterwards as
described in
Cleaning and care
.
Preparing the unit
1. Always place the unit on a dry, level,
non-slip and heat-resistant surface
impervious to contact with the rubber
feet.
2. Prepare the food to be air-fried.
3. Insert the plug into the socket.
4. Put the food into the basket with the
holder
fi
tted. Make sure you do not
exceed the ‘MAX’ marking.
5. Install the basket holder in the
appliance. If it is
fi
tted correctly, a beep
signal is heard and the display
fl
ashes
brie
fl
y. Without the holder
fi
tted, the
appliance cannot be operated.
6. Press
the
key for 2 seconds
to turn
the fryer on. To switch off, press it again
for 2 seconds.
Using automatic programmes
1. Proceed as described under
Preparing
the unit
(1-6) and tap the key.
Ü
The
fi
rst automatic programme
shows on the display.
2. Keep tapping the menu key until
the desired programme is shown.
Temperature and time alternate in the
display.
3. Tap
the key.
Ü
The food is now being cooked. The
display changes between temperature
and remaining running time. Audible
beeps indicate that the pre-set
processing time has elapsed.
Hint!
To adjust the temperature and time
settings individually, press the key
once or twice, and then use the /
keys to set the time resp. temperature.
4. Use the handle to remove the basket
holder from the fryer.
5. Transfer the cooked food into a heat-
resistant container.
6. Allow the basket holder and basket
suf
fi
cient time to cool down.
7. Remove the plug from the wall socket.
8. Clean the basket holder and basket as
described under
Cleaning and care
.
