Assemble the unit
1. Install two 1.5V AA batteries into the push cart.
2. Attach the push cart onto the Axle,and ensurethe 0.65mm
hole on push cart is right above the 0.65mm hole on the Axle.
3. Mount the scale board onto the push cart,andmake sure the
0.65mm hole is in the right place, then lock these parts with
the included screw.
6. Mount the accessories onto the Articulated arm if necessory.
7. Adjust the dolly to a proper angle and ensure the whole set
equiments are fastened.
4. Mount the camera onto the dolly and fasten it.
5. Attach the Articulated arm to the push cart for accessories.
8. It’s ready to use now,speed and direction can be changed by the
swithes on the push cart.
Features
Supports up to 3 KG
With 1/4" screw holes for accessories
With standard 0.65mm hole for connecting camera dollies
Dual motor operation
Powered by two 1.5V AA batteries
Power switch
Variable speed
Forward-backward switch
