Chapter 5:
Timing
84
v3.3-a 12/07/2022
5.4.3 Info/Overview
Each PTP port runs its own PTP instance indendently on a specific process. The information about
the instance can be obtained from command line, using for example the following command for
the first port (wr0):
gpa_ctrl wptpd net/wr0/1/info/
Or through the web interface as shown in Figure , where each port is displayed by a row (see
Table 5:5 for more details on the provided parameters).
Figure 5:18 - wr0 port as active PTP slave with its advanced view expanded.
