© 2020 SEVEN FOR 7. All rights reserved
EN
10
Charging the battery
Charge the battery to the full before the first use. Several charging and
discharging cycles may be necessary to achieve full battery capacity.
The battery can be charged using a USB charger, power bank or from the USB
port of your computer (devices are not a part of offer, not included). To start the
charging process, unplug the lamp from the bicycle rack, remove the cap from
the micro USB socket on the bottom of the lamp, and then plug the USB cable
(included) into the micro USB connector. Plug the second end of USB rack to the
power supply. The start of charging will be indicated by the on/off button
blinking red. When the button light changes to green, constant light, unplug the
USB cable from the device and close the micro USB socket cap.
Avoid excessive battery discharge
.
This can damage the battery or shorten its
service life.
The battery in this device is not replaceable. To remove the battery before
disposing of the device, contact a qualified person.
Micro USB
socket
On/Off
button