Seura Storm Ultra Bright STM3-49-U User Manual Download Page 9

Page: 9 / 20

Before Installation

Operation and Storage Requirements

The ambient temperature for operating the device is between

-40 to +120 degrees Fahrenheit. Do not install the device in

the proximity of heat sources, such as heating pipes, heaters,

furnaces or other devices that radiate heat. Mount the device

in such a way that it is protected against moisture. To prevent

fire or electric shock, never allow liquids to enter the unit. The

uninstalled product must be stored in dry and well-ventilated

rooms, without extreme temperature fluctuations. Heat sources

and aggressive active substances may not be stored in the

proximity of the device. The required storage temperature is 32°

F - 124° F at an air humidity of 5 - 85% RH non-condensing. The

device must be stored in the complete packaging, as delivered.

Installation

Have this product installed by qualified personnel only.

Whether installing your display indoors or outdoors, easy to use

standard mounting systems are available and can be specified

or recommended by Séura. Install the product in a way that it

is fixed properly and take care that children are not exposed

to danger. Please take extra care during installation, avoid

impacts. Before cabling your monitor, check that the power is

off. To avoid any possibility of electric shock, always connect

your equipment to properly grounded outlets. Use of power

cords or adapters other than those provided may cause fire or

malfunction. Place this product as close to the power socket as

possible. Leave enough space to insert and remove the power

plug on demand. Even if you power off the product with your

remote control, power is still present unless the power cord is

unplugged. The device may only be operated with the provided

power adapter. The rated voltage is indicated on the product

label. The device is factory-set to the optimal operating voltage

(see Technical Specification). Use only power cords and plugs

that are suitable for your local electrical outlets. Do not install

the power cord in a way that could obstruct a walkway. Ensure

furthermore that the cable is not clamped and that it cannot be

pulled out accidentally from the power adapter. Do not install

the power cords in the proximity of heating elements and

never place heavy items on the cable or power adapter. Do not

modify or repair the power cords.

IMPORTANT

The display should not be installed directly over a flat

surface if heavy or driving rain may puddle and splash up

onto the lower portion of the display.

Direct sunlight on the display screen will heat internal

components and should be avoided.

IMPORTANT

Le téléviseur ne doit pas être installé directement sur une surface

plane, si de fortes pluies ou de conduite peut flaque d’eau et

éclabousser sur la partie inférieure du téléviseur.

Lumière directe du soleil sur l’écran du téléviseur va chauffer les
composants internes et devrait être évitée.

CAUTION

Do not use any power cords or adapters other than those provided with

this product! Use of power cords or adapters other than those provided

with this product may cause fire, electric shock or malfunction. The

individual components can be destroyed if the polarity is reversed or

an incorrect connection is used. A goodwill replacement is not possible

in such cases, since each device is submitted to meticulous quality

inspections prior to shipping. The connecting plugs must be attached

in such a way that the connector is held firmly. Have trained technical

personnel install the electrical facilities necessary for mounting. Connect

the power cord to a grounded GFCI (ground fault circuit interrupter)

protected outlet. Never cut or damage the power cord.
Please disconnect the device from the power outlet in the following

cases:
1. The device is out of use for a lengthy period.
2. The device malfunctions or displays other unusual features,

necessitating maintenance work.
3. During a thunderstorm.
Please plan the positioning of the power outlet and the source cables

before proceeding with the structural measures and positioning of the

Séura Outdoor Display.

AVERTISSEMENT

N’utilisez pas de cordons d’alimentation ou des adaptateurs autres que ceux fournis
avec ce produit! L’utilisation de cordons d’alimentation ou des adaptateurs autres
que ceux fournis avec ce produit peut causer un incendie , un choc électrique ou un
dysfonctionnement. Les composants individuels peuvent être détruits si la polarité
est inversée ou une connexion incorrecte est utilisée. Un remplacement de l’écart
d’acquisition n’est pas possible dans ce cas, étant donné que chaque appareil
est soumis à des contrôles de qualité minutieux avant l’expédition. Les prises de

raccordement doivent être fixés de manière à ce que le connecteur est fermement

maintenu. Personnel technique ont été formés installent les installations électriques
nécessaires pour le montage. Branchez le cordon d’alimentation à une fuite à la
terre à la terre ( ground fault circuit de coupure ) de prise protégée. Ne jamais
couper ou endommager le cordon d’alimentation.

S’il vous plaît débrancher l’appareil de la prise de courant dans les cas suivants:

1. L’appareil est hors d’usage pendant une longue période.

2. Les dysfonctionnements de l’appareil ou d’autres caractéristiques inhabituelles

affiche , nécessitant des travaux d’entretien.

3. Lors d’un orage.

S’il vous plaît planifier le positionnement de la prise de courant et les câbles de la

source avant de procéder à des mesures structurelles et le positionnement de la
Télévision Séura extérieure.

NOTE

Make sure the power source circuits are properly grounded. Use the

supplied power cord in order to connect it to the power source. If your

installation requires a different power cord, be sure to use an officially

approved power cord displaying the mark of the safety agency that