Seura Hydra HY-19. 5, User Manual

Page: 4 / 13

6 7
PULL OUT EXTRA LENGTH OF EACH OF THE A/V
AND POWER CABLES, ATTACH THEM AND TEST THE UNIT FOR FULL FUNCTIONALITY PRIOR TO ADDING SEALANT TO THE BACK OF THE GLASS
AFTER VERIFYING THE A/V AND ELECTRICAL
CONNECTIONS APPLY A LIBERAL ENOUGH AMOUNT TO SURROUND THE OUTER LIP OF GLASS THAT
SURROUNDS THE BLACK METAL HOUSING NOTING THE MANUFACTURES DESIGNED USAGE.
A
A BRING ALL A/V AND ELECTRICAL CONNECTIONS
UP INTO THE BOTTOM OF THE BACK BOX'S OPENING FROM INSIDE THE WALL
CAVITY PRIOR TO INSTALLING LCD UNIT.
(2) INSTALL BACK BOX
INTO ROUGH OPENING
SECTION A-A
MOUNT BACK BOX
TIGHT TO THE FINISHED WALL SURFACE
MOUNTING LOCATION SHOWING SUPPLIED HARDWARE
1278" ROUGH
OPENING
1812"
ROUGH
OPENING
19"
GLASS DIMENSION
1314" GLASS
DIMENSION
1 4"
3 16"
3 16"
1 4"
(1)
CREATE ROUGH OPENING
WITH THE SEALANT AROUND THE GLASS, INSERT THE LCD ASSEMBLY INTO THE
BACK BOX MOUNTING THAT HAS BEEN ALREADY INSTALLED. SLOWLY COMPRESS
THE ADHESIVE UNTIL THE BACK OF THE GLASS IS TIGHT AGAINST THE WALL SURFACE. VERIFY THAT SEALANT IS SURROUNDING THE
ENTIRE PERIMETER OF THE GLASS FACE.
SEALANT BEFORE UNIT IS ENGAGED
SEALANT AFTER UNIT IS ENGAGED
(3)
VERIFY FUNCTIONALITY &
APPLY SEALANT
(4)
FINAL INSTALLATION
SHEET
3
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE SOLE PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR AS A WHOLE, WITHOUT THE WRITTEN
PERMISSION OF MANUFACTURER, IS PROHIBITED.
DIMENSIONS ARE IN INCHES
TOLERANCES FRACTIONAL 1/8 [3mm]
ANGULAR: MACH 1.0 ANGULAR: BEND 1.0
TWO PLACE DECIMAL .03 [.8mm] THREE PLACE DECIMAL .015 [.4mm] 6 JAN 2012 15 MAR 2011
Date Created Sales Order / Inv. Number
S-R-1913-19.5-HY.5
Item Revised Date
BOTTOM VIEW
Hydra 19-inch High-Definition LCD
Screen Size (Diagonal): 19-inch
Format: 16:9 Brightness: 450 cd/m2
Viewing Angle: 170° Horizontal/Vertical Contrast: 4000:1
Response Time: 6ms Native Resolution: 1920 x 1080
Backlight: LED Menu Languages: English, French, Spanish
Tuner:
ATV: NTSC Digital: ATSC/QAM
Video: 75 Ohm Coaxial Antenna X 1
Composite Video, Audio L, Audio R (RCA plugs) X 1 Component YPbPr (RCA plugs) X 1
S-Video Mini 4-pin DIN X 1
VGA 15-pin D-sub Male X 1 HDMI Type A X 2
USB Type A X 1
Audio: (No Internal Speakers)
Amplified Output for External Speakers: 2 X 5W
Amplified Output: Terminal Block Constant Line Output: 3.5mm Jack X 2
Control: RS232 9-pin DB9 Female X 1
IR IN: 3.5mm Jack X 1 IR OUT: 3.5mm Jack X 4
Power: Input: 110-240 VAC, 50-60Hz, 1.5A
Type A NEMA Plug
Requires GFCI Protected Outlet
SHEET
2
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION IN PART, OR AS A WHOLE, WITHOUT THE WRITTEN
PERMISSION OF MANUFACTURER, IS PROHIBITED.
DIMENSIONS ARE IN INCHES
TOLERANCES
FRACTIONAL 1/8 [3mm] ANGULAR: MACH 1.0 ANGULAR: BEND 1.0
TWO PLACE DECIMAL .03 [.8mm] THREE PLACE DECIMAL .015 [.4mm] 6 JAN 2012 15 MAR 2011 Date Created Sales Order / Inv. Number S-R-1913-19.5-HY.5 Item Revised Date
19" GLASS
DIMENSION
1314" GLASS
DIMENSION
978" SCREEN
DIMENSION
151516" SCREEN
DIMENSION
19" SCREEN
LOCATION
3316" TOTAL
UNIT DEPTH
Sales Order / Inv. Number
Item and Description
Revised Date Reseller
SHEET 1
SIGNATURE AND DATE
REQUIRED
DATE: SIGNATURE:
NOTE: PLEASE SIGN AND DATE THIS PAGE BEFORE RETURNING TO SEURA. ONLY THIS PAGE NEEDS TO BE RETURNED. BY RETURNING THIS SHEET, YOU ARE AGREEING TO ALL DIMENSIONS SHOWN ON ALL DRAWING
SHEETS. FOR CUSTOM UNITS, WE WILL NOT START THE BUILD PROCESS WITHOUT AN AUTHORIZED SIGNATURE. FOR DRAWINGS THAT REQUIRE REVISIONS: SEND THE REVISIONS TO SEURA ON THE ORIGINAL DRAWINGS.
DO NOT SIGN UNTIL ALL REQUIRED DIMENSIONS ARE VERIFIED AND ACCEPTED. AFTER THE DRAWINGS ARE UPDATED, A REVISED DRAWING PACKAGE WILL BE RE-SENT FOR SIGNATURE.
DIMENSIONS ARE IN INCHES
TOLERANCES FRACTIONAL 1/8 [3mm] ANGULAR: MACH 1.0
ANGULAR: BEND 1.0 TWO PLACE DECIMAL .03 [.8mm] THREE PLACE DECIMAL .015 [.4mm]
PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION IN PART, OR AS
A WHOLE, WITHOUT THE WRITTEN PERMISSION OF MANUFACTURER, IS PROHIBITED.
www.seura.com 1.800.95.SEURA
PH. 920.857.9069 FAX 920.857.9490
Date Created 15 MAR 2011 6 JAN 2012
S-R-1913-19.5-HY.5
19"(W) x 13-1/4"(H) Standard Hydra Waterproof Television with a 19" LCD and Glass Color Choice
Display Requirements
Operation and Storage Requirements
The ambient temperature for operating the device is between 41 to 122 degrees Fahrenheit. Do not install the device in the proximity of heat sources,
such as heating pipes, heaters, furnaces or other devices that radiate heat. Mount the device in such a way that it is protected against moisture.
Trouble free operation is ensured up to 75% air humidity. To prevent fire or electric shock, never allow liquids to enter the unit. The product must be
stored in dry and well-ventilated rooms, without extreme temperature fluctuations. Heat sources and aggressive active substances may not be stored
in the proximity of the device. The required storage temperature is 32° F - 140° F at an air humidity of 5 - 85% RH non-condensing. The device must be
stored in the complete packaging, as delivered.
Installation Environment
Avoid direct light or sun exposure, direct proximity to heat sources, outdoor installation. The product is specifically designed for indoor use only. There
is the danger of fire and of electric shock and damage to the device if it is operated outdoors. Do not place any heat sources such as radiators and
heat registers, etc. near the monitor. To reduce eye strain, avoid installing the Séura Television against a bright background such as a window. Position
the monitor at the height of your eye level. Position the monitor directly in front of you at a comfortable viewing distance.
Installation
Have this product installed by qualified personnel only. Use the mounting systems which are specified or recommended by Séura. Install the product
in a way that it is fixed properly and take care that children are not exposed to danger. Please take extra care during installation, avoid impacts. Before
cabling your monitor, check that the power is off. To avoid any possibility of electric shock, always connect your equipment to properly grounded
outlets. Use of power cords or adapters other than those provided may cause fire or malfunction. Place this product as close to the power socket as
possible. Leave enough space to insert and remove the power plug on demand. Even if you switch off the product with your remote control, power is
not cut off unless the power cord is unplugged.
The device may only be operated with the provided power adapter. The rated voltage is indicated on the product label. The device is factory-set to
the optimal operating voltage (see Technical Specification). Use only power cords and plugs that are suitable for your local electrical outlets. Install
the power cords in such a way that it does not obstruct anyone. Ensure furthermore that the cable is not clamped and that it cannot be pulled out
accidentally from the power adapter. Do not install the power cords in the proximity of heating elements and never place heavy items on the cable or
power adapter. Do not modify or arbitrarily repair the power cords.
CAUTION
Do not use any power cords or adapters other than those provided with this product! Use of power cords or adapters other than those provided
with this product may cause fire, electric shock or malfunction. If several kinds of power cords are provided with this product, use the one that fits
your power socket. Do not let the adapter hang down while using. Do not cover or wrap the adapter. Leave space around the adapter to prevent
overheating. The individual components can be destroyed, if the polarity is reversed or an incorrect connection is used. A goodwill replacement is not
possible in such cases, since each device is submitted to meticulous quality inspections prior to shipping. The connecting plugs must be attached in
such a way that the connector is held firmly. Have trained technical personnel install the electrical facilities necessary for mounting. The power adapter
must be installed in ventilated areas due to heat emission. Connect the power cord to a grounded outlet. Never cut or damage the power cord.
Please disconnect the device from the power adapter in the following cases:
1. The device is out of use for a lengthy period.
2. The device malfunctions or displays other unusual features, necessitating maintenance work.
3. During a thunderstorm.
Please plan the positioning of the power adapter and the source cables before proceeding with the structural measures and positioning of the Séura
Television. Observe the protection zones when placing the power adapter! Please bear in mind that the power adapter has to be placed beyond the
inset due to heat emission.
NOTE
The power cable should be adequately secured to prevent it from becoming unstable and/or falling. Make sure the power source circuits are properly
grounded. Use the supplied power cord in order to connect it to the power source. If your installation requires a different power cord, be sure to use an
officially approved power cord displaying the mark of the safety agency that defines the regulations for power cords in your country.
Ensure that your installation complies with your national and local safety rules. Any servicing, adjustment, maintenance or repair must be performed
only by service-trained personnel.
Setup
Before using the device please check the following contents of the box for completeness:
TV Assembly
50' Low-Voltage
Power Cable
Back Box
Manual and Custom
Drawing Package
Waterproof
IR Remote
Control
RS-232
Adapter
Composite
Adapter
YPbPr
Adaper
Mounting
Hardware
2010 Remote Redesign
Final
w a t e r p r o o f
last
ok
enter
channel
volume
cc guide
mute
sleep
zoom
input display menu exit
Input/Output Overview (Bottom View)
Remote Functions
2010 Remote Redesign
Final
w a t e r p r o o f
last
ok
enter
channel
volume
cc guide
mute
sleep
zoom
input display menu exit
Power On / Off
Menu Controls
Press “Menu” to launch On Screen Display menu
Use arrows and “Ok” to navigate menu and make
selections
Press “exit” to close the On Screen Display menu
“Mute” turns on or off all audio output
“Sleep” designates power off after a specified time
“Zoom” configures ratio and appearance of picture
“Input” designates displaying content source
“Display” displays input and resolution information
Use Volume arrows to increase or decrease
volume level
Use Channel arrows to increase or decrease
channel selection
“Guide” displays available EPG (Electronic
Program Guide) when using tuner input
“CC” turns on/off subtitles
“Last” recalls last channel viewed
Numerical selection for channels and settings
19" TV Shown
Low-Voltage Power
Adapter and Cable
RS232
Input
S-Video
RF Coaxial
Antenna
USB
IR Input
Audio Line
Out
VGA
Input
HDMI 1
Input
HDMI 2
Input
Power Adapter
Input
Speaker Out
Audio
Line
Out
PC
Audio In
Composite
YPbPr
IR Output
BOTTOM VIEW
TV Back Box
TV Assembly
Glass Face