Seuic AutoID 9 Manual Download

Page: 3 / 104

Chapter Usage Note

1.1 Caution for Laser scan engines

Laser radiation; users do not stare into beam.

1.2 Safety notes

➢

Your device can only use the battery and charger specified by the

company. Any other products may cause the battery leakage,

overheating, burst and fire.

➢

Do not short circuit a charger, otherwise it will cause an electric shock,

smoke and charger damage.

➢

Please do not use the charger when the power cord is damaged,

otherwise it will cause fire and an electric shock.

➢

Please do not disassemble or modify the charger, otherwise it will

lead to personal injuries, an electric shock, fire and charger damage.

➢

Seize the charger when pulling the plug, and pulling the power cord

will damage the cord, causing an electric shock and fire.

➢

Clean the device, battery and charger with a piece of soft and dry

cloth.

➢

Please do not use alcohol, thinner, benzene or other solutions to wipe

the device.

Summary of Contents for AutoID 9









































































































Search results

Summary of Contents for AutoID 9

Reviews:

Related manuals for AutoID 9

Brands by name

Popular brands

Seuic AutoID 9, Manual

Search results

Summary of Contents for AutoID 9

Reviews:

Related manuals for AutoID 9

Brands by name

Popular brands