Seuic
AUTOID 9/9HC
71
Picture8-33 Two dimensional code import window
(2)
After the success of the analysis, the pop-up configuration import complete, please
restart the entry into force!”, click on [restart at once]
.
Picture8-34 The interface after successful analysis
Note: if the two dimensional code density is too large, it will prompt resolution failure.
8.6.2
Export
1
Export file
This function can be used to configure the machine to import all the configuration
items in the export tool, can be exported to the machine built-in SD card specified
directory. Export file format is XML file, the file name is geustinfo.xml. For export
standard document, set the application is set up for the application, such as the mobile
housekeeper after burning the mirror without any operation, then the mobile
housekeeper without the corresponding set of information, the export file will not
contain the information of mobile housekeeper. (Note: the wallpaper import settings
are dependent on the mobile housekeeper settings).
(1)
Enter Once Configure
,
click
【
File export
】
,Pop up the following interface to show
success:
Summary of Contents for Autoid 9 series
