8
Press and hold the RIGHT button (“
”) to adjust the alarm door delay (i.e. number of seconds
before the LED ring will turn red when pressure alarm limits are exceed); the screen text will
flash 3 times to indicate that the setting is ready to be adjusted.
Use the LEFT ("
") and MIDDLE ("
") buttons to adjust between 000 and 999 seconds. If you
hold the adjustment button, numbers will accelerate for convenience.
When finished, press the RIGHT button (“
”) to save the setting. The screen text should flash
3 times to indicate return to the main configuration selection screens.
Press and hold the RIGHT button (“
”) to adjust the room pressurization (i.e. whether the room
is positively or negatively pressured); the screen text will flash 3 times to indicate that the
setting is ready to be adjusted.
Use the LEFT ("
") and MIDDLE ("
") buttons to adjust between positive ("POS"), negative
("NEG"), or neutral ("OFF").
When finished, press the RIGHT button ("
") to save the setting. The screen text should flash
3 times to indicate return to the main configuration selection screens.
Press and hold the RIGHT button (“
”) to adjust display behavior (i.e. whether the LCD display
shows the digital pressure reading by default); the screen text will flash 3 times to indicate that
the setting is ready to be adjusted.
Use the LEFT ("
") and MIDDLE ("
") buttons to adjust between showing a digital reading by
default ("ON"), or showing a blank screen ("OFF").
Note: When display is set to "OFF", the digital pressure reading is still viewable by pressing
the front lens and then numbers will vanish after 3 seconds.
When finished, press the RIGHT button ("
") to save the setting. The screen text should flash
3 times to indicate return to the main configuration selection screens.
3.5.4 Room
3.5.5 Display
