www.setolite.com
© SETOLITE Lichttechnik GmbH
Alle Rechte, einschließlich Übersetzung behalten wir uns vor. Die vollständige oder teilweise Vervielfältigung ist nur mit schrift-
licher Genehmigung des Herausgebers zulässig. Die Angaben in diesem Dokument entsprechen dem technischen Stand bei
Drucklegung, Änderungen in Technik und Ausstattung, sowie Irrtümer und Druckfehler vorbehalten.
Type
SETO COMBAT X1
SETO COMBAT X2
Input voltage
DC 12.6V 3 A
DC 12.6 V 3 A
Illuminant
LED Technology
LED Technology
Luminous flux
approx.
300 - 3.200 lm
400-4.000 lm
Color
temperature
6200 K (cw)
4200K (nw)
3000K (ww)
6200 K (cw)
4200K (nw)
3000K (ww)
Lighting duration
6.5 hrs - 78 hrs
7.5 hrs - 78 hrs
Battery
Li-ion, 3.6V,
15.600 mAh
Li-ion, 3.6V,
23.400 mAh
Charging time
3 hrs
4 hrs
Dimensions
(LxWxH) approx.
229 x 100 x 36mm
296 x 100 x 36mm
Weight
598 g
822 g
Technical data
All rights, including translation, are reserved. Reproduction of any kind, for example photocopying, microfilm or data processing
equipment are forbidden without the written permission of the publisher. Reprint, also partly is forbidden. The operating
instructions reflect the current technical state of printing. Changes in technology and equipment, as well as errors and omissions
are reserved.
DEUTS
CH
ENGLISH
ENGLISH
Rev. 1.0
3. On/Off Dimming control CCT control
1. On/Off and dimming control: Press each
button shortly to light up and adjust the
brightness in 1-2-3 stages. When you press the
fourth time, the light turns off.
2. CCT control: When light is on, press CCT
control button shortly to adjust the light color
in three steps: Warm - Bright - Cool
4.
Power bank function
After connecting the USB cable, press and hold
center power button “ “ for 2 seconds
to start charging the external device. If you do
not want to use it, press and hold side power
button “ “ for 2 seconds to end the char-
ging.
Operating
Power In port
Handle / Hook
Side LED light and
diffusion filter
Center LED light
and diffusion filter
1/4 inch tripod
socket
USB Out port
Battery level
indicator
Center power button
(On / Off and dim-
ming)
CCT control button
Side power
butto (On/Off
and dimming)
+ Battery
check
1.
Charging the lantern
Open the cover of the product and connect the
adapter to the Power In port. Charging time
may vary depending on battery capacity and
external environment.
2.
Battery level check
The battery indicator blinks and indicates the
remaining battery level in four steps. (The
remaining battery level is displayed for about 2
seconds in the 1-step brightness on both sides.)
In order to remove dirt, dust, oil, grease, etc., use a
soft cloth that is lightly moistened with a mild soap
solution or water. Afterwards, dry it off with a soft, dry
cloth. Do not use corroding substances or solvents for
the cleaning.
Cleaning and care
Battery indicator
0~25%
25~50% Flickers
50~75%
75~100%
Fully charged Stop
