*NOTE: Make sure that the power harness and LVDS cable has been connected securely if not
connected properly there may be problems in power being sent to the interface .
In order to install the
interface you will need
to open the glove
compartment to gain
access to the HU/CD
unit. Once gaining
access you will need to
remove the main
harness and insert our
harness in its place
and insert the OE
harness into our plug
in order to complete
the T-Harness.
You will need to
connect the LVDS
video in the same
manner.
In order to know the
correct LVDS to
connect please
remove one by one to
see which one of them
once removed make
the OE LCD go black.
Remove the power harness and
connect our Power T-Harness here.
Remove the Blue LVDS cable and
connect to the camera interface box
and our LVDS cable in its place.
