Description
ADMIRAL Compact is a ready to install WC pan with an inte-
grated pump / macerator. The unit is for domestic use only.
Installed and used correctly, ADMIRAL Compact will give
consistent and reliable service.
Operation
ADMIRAL Compact is operated by an electronic programm.
It has 2 functions:
· It will macerate the WC waste and pump it away to the drain:
a push of the button will set in motion the 25 second cycle to
the above.
· It will pump away the waste water from a washbasin. In this
case, the motor will activate automatically when the water
enters.
Applications
The unit is for domestic use. Applications are discharge of a
WC and a washbasin. All other application and commercial
use are to proscribe.
Technical data
Max. vertical pumping
3m
Max. horizontal pumping
30m
Evacuation diameter
32mm
Normal power rating
800W
Medium water temperature
35°C
Electric class
I
Noise level
61dBA
Net weight
26 Kg
Installation
a) Attaching the toilet to the floor (fig. 7a)
Find a suitable location, place the unit on the floor without attaching it. Mark the per-
imeter of the bowl on the floor and mark where the bracket screws will be, (rear screw
holes). Remove the bowl. Measure 15mm inwards from the line and mount the L-
brackets on the floor.
Note: To reduce noise level when the toilet ist installed on a hard floor, you may want
to insert an insulating material between the floor and the bowl.
b) Connection of the discharge (fig. 7b)
· Push the plastic insert and rubber flap (H) down into the rubber discharge pipe until
it is flush with the lip.
· Point the non-return valve flap so that it opens in the direction of flow of the dis-
charge. Now place the discharge elbow over the flap assembly.
· Secure the base of the elbow (I) to the discharge pipe and non-return valve flap
assembly with the jubilee clip (C) provided.
Attention: Ensure that you do not twist the discharge pipework inside the unit.
Attention: The horizontal portion of the discharge pipe should be installed in a gra-
vity flow (at least 1%). Avoid any low parts in the discharge pipe.
Attention: Protect pipes against freezing with appropriate insulation. If the toilet is
installed in an unheated location during freezing periods protect it as follows:
- shut off the water supply
- activate one cycle without water
- pour antifreez in the bowl (2 liters)
-flush the toilet
Attention: Any bends in the discharge pipe run should be smooth radius bends. If
using plastic pipe, two 45 degree offsets can be used to form a smooth bend.
Note: We would recommend that a drain-off point is installed to allow the discharge
pipework to be drained down before any service work.
c) Connection of a washbasin (fig. 7c)
If you want to connect a washbasin to your ADMIRAL Compact unit, please refer on
fig. 1 to 3
d) Connection to the water supply (Abb. 7d)
Connect the water supply hose to a shut off valve.
Attention: For a correct rising, the water pressure should be at least 1.7 bar.
Note: In an area where the water is not pure, we advise you to add a filter between
the shut off valve and the toilet to prevent clogging of the solenoid valve.
e) Connection to the electrical supply
Electrical installations should be build by specialists. The electrical installation should
be installed after finishing the installation of your macerator unit.
The electrical installation must be in accordance with the current electrical code. The
product should be connected at all the times to the electrical supply.
GB
SETMA (Deutschland) GmbH
Siemensstrasse 3
D-85716 Unterschleissheim
Tel. +49 (0)89 / 317 13 19
Fax +49 (0)89 /317 57 66
List of accessories included (fig. 4)
Dimensions (fig. 5)
Performance curve (fig. 6)
