NCS12
S12
12C
RX LEVEL
VR2
TX LEVEL
SW1
RX RANGE
SW3
OFF
ON
OFF
3019 Alvin DeVane Blvd.
Ste. 560
Austin, TX 78741
Phone: (650) 965-8020
CORPORATION
®
TECH SUPPORT: 650-965-8020 ext. 703
Questions or technical issues? Please call:
Page 3 of 3
RX Audio level is normally
set by the volume control on
the mobile radio.
If further adjustment is
needed, RX LEVEL control
VR2 can be used to adjust
RX volume.
MS-900SP Controls and Adjustments
TX Audio level is normally factory-preset to the correct level for the
radio type specified when the MS-900SP is ordered.
If a different TX level is required the TX LEVEL SW1 can be set
from 0 (highest) to F (lowest) to accommodate various radios.
Call Setcom Tech Support for assistance if needed.
MS-900SP shown with top cover removed:
N O
1 2
If RX LEVEL control VR2 does not provide
enough adjustment range, the RX RANGE
switch SW3 can be set to allow higher or
lower level settings.
RX RANGE
SW3
(shown enlarged)
ON
OFF
To increase RX Level,
set section 1 to ON
To decrease RX level,
set section 2 to ON
Do not set both sections
to ON, use only one
section or the other
Section 2
Section 1
For Factory Calibration
DO NOT ADJUST
