U S E R
GUIDE
Set Up & Use
1.
Install the 9V battery in the battery compartment. Close and secure.
2.
Turn all knobs and controls on the SMARTCOM to lowest settings [counter
-
clockwise] before proceeding.
3.
Connect your pro headphone
’
s 4
-
Pin XLR Female plug to the 4
-
Pin XLR Male jack.
4.
Connect the SMARTCOM to your smartphone via the 3.5mm TRRS jacks using the included 6ft TRRS cable.
5.
Use the belt clip to secure the SMARTCOM where it will be accessible by the operator.
6.
Use the POWER toggle switch to turn the SMARTCOM on.
7.
Adjust volume (output) level on the smartphone. NOTE: Some smartphones may require higher or lower adjustment.
For best results, we recommend medium to medium
-
high volume level. Adjust MIC and EAR levels to desired levels.
8.
The EAR level control adjusts headphone volume of the audio you hear through the Headphone during a phone call or
when a media file is played back on your smartphone.
9.
The MIC level controls how much of the microphone volume on the headphone is sent back to the smartphone.
10.
Press MUTE to mute the headset microphone.
1
3.5mm TRRS Jack
2
4
-
Pin XLR Pro Headphone Jack
3
9V Battery Compartment
4
Mute Button
5
Power LED Indicator
6
On/Off Switch
7
EAR
-
Controls Headphone Volume
8
MIC
-
Controls Headphone Mic
9
Belt Clip
4
5
2
1
3
6
7
8
9
SMARTCOM Set Up
