Connecting the SES-SBA-150W
3
5 Connecting the SES-SBA-150W
To connect the
SES-SBA-150W
, as the example in Figure 4 illustrates, do the
following
1
1. Connect the balanced stereo audio source (for example, a stereo audio
player) to the INPUT terminal block connector.
:
2. Connect the OUTPUT terminal block connectors to the acceptors (a pair of
speakers). Do not ground the loudspeakers.
3. Connect the 24V DC power adapter to the power socket and connect the
adapter to the mains electricity.
4. If necessary adjust the basic volume level by setting the GAIN DIP-
switches (see Table 2).
5. Adjust the output volume by turning the VOLUME potentiometer.
Table 2: DIP-switch Gain Levels
Switch
Setting
00
01
10
11
Gain
20dB
26dB
32dB
36dB
5.1
Connecting the Stereo Audio Input
Figure 2 and Figure 3 illustrate how to wire a balanced/unbalanced input
connection:
Figure 2: Connecting the
Balanced Stereo Audio
Input/Output
Figure 3: Connecting the
Unbalanced Stereo Audio
Input
1 Switch OFF the power on each device before connecting it to your SES-SBA-150W. After connecting your
SES-SBA-150W, switch on its power and then switch on the power on each device
