BASIC CONTROLS
-LEVEL: Controls the amount of delay that is mixed with the
dry signal.
-FEEDBACK: Controls the number of repeats. From 0 repeats
to self-oscillate delay. Note that the oscillation point is
different on delay and echo modes.
-DELAY: Sets the delay time. From 40ms to 580ms. This
knob also controls the note subdivision (see Subdivisions
section)
-RATE: Controls the speed of the modulation. Turning the
knob counterclockwise will yield slower oscillation.
-DEPTH: Controls the amount of modulation added to the de-
lay repeats. Fully counterclockwise has no modulation added.
Fully clockwise you can obtain crazy modulation sounds.
The modulation response depends on the delay time. You can
play with the modulation rate to adjust it to the actual
delay time.
ECHO OR DELAY
The Yodelmaster2 has the possibility to change between two
different repeat modes.
The echo mode brings the saturation of the classic tape echo
units. The repeats are dirtier and less filtered.
The delay mode emulates the warm sound of a BBD analog
delay. The repeats are darker and warmer.
To switch between the two modes it’s recommended to decrease
the Level control. The Tape mode has a different response.
So mode changes can cause a volume jump.