Servotronix CDHD Series, Application Note

Page: 13 / 17

Pulse and Direction Using Single-Ended Signal Operation
Application Note 13
Step 3 – Set Pulse and Direction Parameters
1. Return to the Motion screen.
2. Select Multiplier .
Note that the schematic diagram reflects the setting.
It is strongly recommended that you enable Multiplier. This internal CDHD
feature is functional in pulse and direction operation, and typically improves
the Pulse and Direction reading.
3. Make sure the Gear mode is Engaged .
4. In the Ratio pane, set the External Encoder Resolution and Ratios .
The relationship between the number of incoming pulses and the motor
shaft movement is determined by the External Encoder Resolution, and the
Gear Ratio Multiplier and Divider (GEARI/GEARO).