Servomex NanoTrace DF-760E, Instruction Manual

Page: 62 / 182

58 DF-760E User Interface
7.5.4.2 View Location
The view location function is used to view data previously stored in the system sorted by
location. On the Moisture Data Downloader screen Figure 33, use the
Next
key to move to
the list of existing names and then use the arrow keys ( and

to select the location
desired. Then use the
Next
key to move to
View Location
and press
Enter.
The View
Location screen will appear as in Figure 34.
Figure 34: View Location Screen
Use the arrow keys ( and

to select the data block desired and use the Next key to
move to View Location and press Enter. The data history screen will appear as shown in
Figure 29. From the data history screen, the data may also be downloaded to a USB
memory stick by way of the remote USB port found behind the front door.
7.5.4.3 Add Location
The user can create a new location stamp by moving the cursor to the
Add Location
button and hitting enter. This brings up the keyboard shown in Figure 35 that is used to
enter the name of the new location.
Figure 35: Keyboard Display
Use the arrow keys ( and

to navigate the keyboard and use the Enter key to accept
each character. If an error is made use the Next key to move to the Clear Entry key and
hit enter. When the location name is complete use the Next key to move the highlight to