Servomex 07931001B, Operator'S Manual

Page: 88 / 221

74
© Servomex Group Limited. 2020 07931001B revision 6
Clear history
Clear history will clear the current history log stored in the selected media. You will
be asked to confirm the action before clearing. It is recommended to only clear the
history when the log is full.
5.2 Measurement
Figure 5-2: Measurement menu
Gas sensor
Allows you to view the current status of the
analyzer’s
gas sensor, measurements
for any mA input devices and transmission level.
Note : Parameters cannot be changed only viewed
mA input
Provides information on mA input devices:
•
Measurement and units
•
Calibrated current
•
Filtered current
•
Unfiltered current
Control unit power
Provides information on Input supply power and 12 V rail.
Graphs
Shows raw data and filtered graphs for each measurement.
Menu Measurement
Calibrate
Level 2 Level 3 Level4 Level 5
Data Log Measurement XX
Alarms
Transmission XX
Status
Set Up
Measurements
Service
Control Unit Power scroll
Graphs scroll
Gas Sensor scroll
mA Input scroll