SerVision MVG200, Configuration And Management Manual, Page: 77 / 241

SerVision Embedded Video Gateway System Guide
Configuring System Settings 76
 Field  Description
Username Fill in the username required to access the FTP directory on the FTP server.
Password Fill in the password required to access the FTP directory on the FTP server.
JPG Upload Interval Select how frequently snapshots
of events
should be transmitted to the FTP server.
When FTP is activated for a sensor, snapshots from cameras associated with the
sensor will be uploaded this frequently.
Note: The resolution of the snapshots is the same as the resolution of the recorded
video of eafch camera (see
Video Recording Settings
, page 104).
Automatic Image
Upload
Select how frequently snapshots should be transmitted from cameras (routinely, not
in response to events), or select Disabled if you do not want any snapshots to be
transmitted in this way.
Resolution Select the resolution for the snapshots that are uploaded automatically.
4. Click Update , and then save the settings. The changes will be implemented after the unit is restarted (see
Saving Configuration Changes , page 156).
Schedules
Schedules allow you to configure the unit to automatically switch the running outline at specified times. You can set
up standard repeating schedules for routine time periods, such as regular work weeks or the summer months. You
can also define special schedules for holidays, both repeating holidays (e.g., New Years Day) and non-repeating
holidays (e.g., a presidential visit or the opening ceremony of the Olympics).
The schedule is only implemented by the system if the following conditions are met:

Multiple outlines are defined for the system (see Defining Alternate Outlines , page 149)

Schedule-triggered outline-switching is activated in the
General System Settings
screen (see General
System Settings , page 17)


 To configure the schedule:
1. In the
Main Menu
, under System , click Schedules . The
Schedules
screen opens. If schedule-triggered
outline switching is not activated in the
General System Settings
screen, Inactive appears in parentheses
after the name of the screen. In this case, you can configure the schedule, but it will not be implemented unless
you activate schedule-triggered outline switching.