SerVision MVG200, Configuration And Management Manual, Page: 72 / 241

SerVision Embedded Video Gateway System Guide
Configuring System Settings 71
 Field  Description
Note: Large frame (VGA or D1) is available only if large-frame recording is activated for
one or more of the cameras connected to the Video Gateway. (See
Advanced Recorder
Settings
, page 106.)
For additional information about video resolutions, see
Video Resolution
, page 18.
Note: If you select a frame size that is larger than the frame size of the default recording
setting of a camera, the default setting is used and the value you specify is not
implemented. For example, if VGA is selected here, and recording for the camera is in
SIF, the uploaded video will be in SIF.
Note: This setting only affects the resolution of the video uploaded to the AVV server; it
does not affect the size of the image attached to the e-mail notification.
FPS Fill in the required framerate for the recordings, in frames per second.
Note: If you specify an FPS value that is larger than the FPS value of the default
recording setting of a camera, the default setting is used and the value you specify is not
implemented.
KBPS Fill in the required bitrate for the recordings, in kilobits per second.
Note: If you specify a KBPS value that is larger than the KBPS value of the default
recording setting of a camera, all of the default quality settings are used and the values
you specify for maximum size, FPS, and KBPS are not implemented.
6. Under Pre-Recording , specify the number of seconds of video from immediately before the event was
triggered to include in the upload.
7. Under Post-Recording , specify the number of seconds of video from immediately after the event ended to
include in the upload.
8. Click Update , and then save the settings. The AVV option is added to the camera, sensor, and activator
screens. The changes will be implemented after the unit is restarted (see Saving Configuration Changes ,
page 156).
Note: You can now configure devices to act as triggers for AVV. A list of devices that are configured to
trigger AVV is displayed at the top of the AVV screen.
Figure 72: List of devices configured to trigger AVV
Devices
configured to
trigger AVV