SerVision MVG200, Configuration And Management Manual, Page: 67 / 241

SerVision Embedded Video Gateway System Guide
Configuring System Settings 66
 Field  Description
User Name Enter the user name to insert in the
sender
address of the e-mail message. For example,
if you want the sender address to be alert@test.com , enter
alert
.
SMTP
Authentication If the SMTP server requires authentication, select Enabled . The Username and
Password fields are added to the screen.
Username Fill in the username of your e-mail account as it appears in your e-mail software
configuration.
Note: This field only appears if SMTP Authentication is enabled.
Password Fill in the password of your e-mail account as it appears in your e-mail software
configuration.
Note: This field only appears if SMTP Authentication is enabled.
Figure 66: E-mail settings
Note: Internet mail accounts (e.g., Yahoo or MSN) are not supported. A list of free SMTP servers can be
found at http://www.e-eeasy.com/SMTPServerList.aspx .
7. Click Update , and then save the settings. They will be implemented after the unit is restarted (see Saving
Configuration Changes , page 156).
SMS Message Templates
The following codes can be included in SMS message templates:
 Code  Description  Example
&S The name of the sensor or VMD that triggered the event Front Door
&U The name of the Video Gateway unit Bus-5478
&T The time of the event 22 Feb 07 00:17:16
The default message template is:
&S activated on &U at &T
If the Front Door sensor is triggered, John will receive the following SMS message from the Video Gateway: