SerVision MVG200, Configuration And Management Manual, Page: 56 / 241

SerVision Embedded Video Gateway System Guide
Configuring System Settings 55


 To prioritize the network connections:
1. In the
Main Menu
, under System , click Network Priorities . The
Network Priorities
screen opens, and
displays the three networks – LAN , WLAN (WiFi), and Cell (Modem) – in their current order of priority (the
top network is ranked highest).
Figure 51: Network Priorities screen
2. To change the position of a network in the ranking, select the network type and then click Up or Down .
Figure 52: Moving a network up in the ranking
3. Click Update . The settings are immediately implemented on the unit.
4. Save the settings to implement them permanently (see Saving Configuration Changes , page 156). It is not
necessary to restart the system.
Port Forwarding
Port forwarding makes it possible for remote devices to access devices within the unit’s local network. Each device
that you want to make accessible to incoming connections is linked with a particular port of the router. To connect
to the device remotely, you use the external IP address of the router (the IP address of the Video Gateway on the
external network), and the assigned port number.