SerVision
Embedded Video Gateway System Guide
Appendix A: Viewing Video on a CCTV Monitor (TV-Out)
213
Playback by Time
If you selected playback by time in the
Playback
menu, the
Time Selection
screen opens.
Figure 251: Time Selection screen
To play back recorded video by time:
1. Under
From
, select the date and time at which you want to begin playback, and under
To
, select the date and
time at which you want to end playback, as follows:
Select the value you want to modify (e.g., in the figure above, under
From
, select “12” if you want to
change the minute value of the start time), or select the right and left arrows
to scroll through all of the
values. A box appears around the selected value.
Select the up and down arrows
as necessary to modify the selected value.
The duration of the selected time period appears under
Duration
.
Note:
To close the screen and return to live video display, select
Done
.
2. Select
Play
. The
Playback
screen opens, and the video is played, beginning with the specified start date and
time, in the size you specified in the
Playback
menu. Playback controls appear in the upper left of the screen.
, page 215, for information about the
Playback
screen.
Playback by Sensor
If you selected playback by sensor in the
Playback
menu, the
Sensor Selection
screen opens. The screen contains
a list of the sensors connected to the selected camera (including the camera’s VMD, if it is activated).