11
12
T: 0333 577 7232
T: 0333 577 7232
TECHNICAL SPECIFICATION
INSTALLATION
TECHNICAL SPECIFICATION
INSTALLATION REQUIREMENTS
Before unpacking and manoeuvring your Fridge, please take the time to read and become familiar
with the following points:
To avoid risk of injury, please take care when moving your Fridge. It is heavy and we
recommend that a minimum of two people move it. Your Fridge has a wheel in each back
corner. You will find it easiest to move your Fridge when it is tilted backwards and pushed
into position.
Make sure that your Fridge can fit through all doorways on route to its final location. The
dimensions of your Fridge (including the handle) are 840 mm high x 540 mm wide x 595 mm
deep.
Your Fridge should be positioned in a location that meets the following requirements:
In a dry room that can be ventilated and out of direct sunlight.
Away from any heat source such as a radiator. If this is unavoidable, a suitable heat
insulator should be used (this is not supplied).
On a suitable floor that will not become damaged, or sag under the weight of the Fridge.
At least 500 mm away from stoves, ovens and heater cores and 50 mm away from electrical
ovens.
At least 20 mm away from another freezer.
Clearance of at least 200 mm is required at the top and back of your Fridge. Do not place
anything on top of your Fridge.