15
16
T: 0800 0124 382
T: 0800 0124 382
INSTALLATION
SUPER SWITCH
The super switch (Figure 6) is used to rapidly cool down the Fridge or for energy efficiency when
the ambient temperature is low (below 16°C) for a long period of time, such as during the winter.
In normal operation the super switch should be set to
✹
(off). You should only set it to on if:
The ambient temperature is below 16°C for a long period of time.
When setting up your Fridge for the first time.
Figure 6
When using your Fridge for the first time, or after transportation, keep it in an upright
position for at least 3 hours before plugging into the mains. This allows efficient operation
and prevents damage to the compressor.
We recommend that you wipe all shelving and trays with a cloth soaked in warm water
mixed with a teaspoon of sodium bicarbonate before use. After cleaning, rinse with warm
water and dry.
You may notice a slight odour when using your Fridge for the first time. This is perfectly
normal and will fade away once the fridge starts to cool.
Before using your Fridge, make sure that it has been connected to an appropriate mains
power supply and is switched on at the socket.
When using your Fridge for the first time, set the thermostat to a value of 4 and set the
super switch to on for the first 24 hours. Avoid opening the door while the Fridge is cooling
down and do not place a lot of food inside the Fridge, otherwise it will take longer to reach
operating temperature.
Your Fridge has a 5 minute built in delay function, designed to prevent damage to the
compressor. When power is applied to your Fridge, it will begin to operate normally after 5
minutes.
BEFORE USING YOUR FRIDGE
USAGE
