47
48
T: 0800 0124 382
T: 0800 0124 382
TROUBLESHOOTING
Fault
Possible Cause
Solution
Your Dishwasher is vibrating.
The feet of your
Dishwasher
are not correctly adjusted.
Adjust the feet (see page 13
for further information).
Knocking noises are coming
from inside your Dishwasher
during a wash programme.
Dishes are placed incorrectly
or are loose in the
Dishwasher.
The spray arm is hitting the
dishes in the lower basket.
Press the Start/Pause button
to pause the programme.
Open the Dishwasher
(CAUTION: the interior will be
hot and steam may come out)
and rearrange the dishes.
Pause Dishwasher, as
described above, and move
or remove items blocking the
spray arm.
White stains left on dishes
after washing.
Not enough detergent used.
Rinse aid dosage set too low.
No special salt is being used,
despite high water hardness
level.
Water softener setting set
too low.
Use more detergent.
Increase rinse aid dosage
setting (see page 24 for
further information).
Use Dishwasher salt
recommended for the water
hardness level in your area.
Set the water softener level
to a higher setting (see page
20 for further information).
Fault
Possible Cause
Solution
White stains left on dishes
after washing.
Salt compartment cap not
closed properly.
Close salt compartment cap
properly.
Food waste left on dishes
after washing.
Too much food waste left on
dishes when they are placed
in the Dishwasher.
Not enough detergent used.
Wrong wash programme
selected.
Spray arms clogged with food
waste.
Filters clogged.
Filters incorrectly fitted.
Water drain pump clogged.
Basket overloaded.
Remove coarse residues and
food waste from your dishes
before placing your dishes in
the Dishwasher.
Use more detergent.
Use a more powerful wash
programme.
Clean spray arms (see page
41 for further information).
Clean filters (see page 40 for
further information).
Check filters are correctly
fitted.
Remove filters and clear
water drain.
Do not overload baskets.
