11
Button on Local Computer Unit
There are three modes that can be chosen, the sequence is as
follows:
Auto
→
Loc
→
Com(Remote)
Auto:
•
In this mode, the Remote and Local LEDs are flashing
alternately.
•
The system is now waiting to be controlled by either
Local
Computer Unit
or
Remote Station Unit
.
•
Once the keyboard or mouse of
Local Computer Unit
is
active, the LED of Local is on and the LED of Remote is off.
This status indicates that the
Local Computer Unit
is now
taking control of the system.
•
Once the keyboard or mouse of
Remote Station Unit
is
active, the LED of Remote is on and the LED of Local is off.
This status indicates that the
Remote Station Unit
is now
taking control of the system.
•
In either case, the latch time period of 5, 15, 30, or 60
seconds is offered to allow the
Local Computer Unit
or
Remote Station Unit
to take control again. If the latch time
expires with no keyboard or mouse activity, the status
returns to the “
Auto
” mode.
•
In
“
Auto
” mode, whenever the
keyboard
,
mouse buttons
or
scroll wheel
of mouse is activated, the Unit (
Local
Computer Unit
or
Remote Station Unit
) immediately takes
control of the system.
Local:
The LED of Local is “
On
”. In this mode, the system is being
controlled by the
Local Computer Unit.
In this case, the
Remote Station Unit
can learn this status from the flashing
of 3 LEDs (
Num
,
Caps
and
Scroll Lock
) on the keyboard.
Remote:
The LED of Remote is “
On
”. In this mode, the system is
remotely controlled by the
Remote Station Unit
.
Summary of Contents for Extend Cat5
Page 2: ......
Page 7: ...5 Product Description Figure 3 Indication and Connection...
