Page 8
Manual #EM_01777_RevD 022322
UNIT DOES NOT HEAT?
• Ensure cord is securely plugged in.
• Ensure unit is on.
• Ensure thermostat knob is set correctly.
• Ensure power is available from source.
• Do not allow any of the electrical components
to get wet. Moisture may cause the unit to
trip breaker or GCFI. If moisture is suspected,
discontinue use. Allow unit to fully air dry.
POUCH DOES NOT EVACUATE
ALL PRODUCT?
• Ensure that the pouch is properly connected
with pump.
TROUBLESHOOTING
NEED HELP?
Please be prepared with your Model, P/N and
Series located on the lid or base of the unit.
Example:
262.628.5600 | 800.558.8722
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA
MODEL
XXXX
P/N
#####
SERIES
##X ##X
SERVER PRODUCTS
This Server product is backed by a two-year
limited warranty against defects in materials and
GENERAL SERVICE,
Before sending an item to Server Products, contact
Customer Care to request a Return Authorization
Number. The RA Number ensures proper processing
and a prompt turnaround. Repaired units are typically
shipped out within 48 hours of receipt.
Merchandise returned for credit will incur a 20%
restocking charge, must be less than 90 days old, and in
unused (new) condition. Electrical parts (thermostats,
heating elements, etc.) are not returnable.
Servicing Cord: Specific tools are required for safe and
proper power supply cord removal and installation.
Repairs should be done by an OEM representative or
qualified technician using a cord meeting code H05
RN-F requirements.
