Page 6
SETUP
PRACTICE SAFETY.
WASH ALL PARTS PROPERLY BEFORE USE.
See page 11.
POUR
1
Remove internal jar from the back of the
shroud by removing the back slide panel and
pull out through the back. Fill jar to 1-inch
below the handles to allow for displacement
of product when pump is inserted. Do NOT
pour directly into dispenser shroud. Put lid
on jar and slide jar through the back panel
of the shroud and put slider panel back on
the shroud.
Align pump guides into slots in shroud and guide the pick-up tube
through the hole in the lid and into the food product. Prior to putting
lid on, prime the pump with your hand(s) by pressing the dome and
releasing until food product fills the discharge tube.
INSTALL PUMP & PRIME
2
Fill Point
Jar
Shroud
Pump primed with food product seen in
discharge tube.
Pump being primed by hand
by pressing the dome and
releasing until food product
fills the discharge tube.
