Fig 1 Fig 2
Instructions
Boot: Open the cover behind J -1602, toggle switch to the bottom of the DC file, the device
is powered on, the device power supply for the built-in lithium battery; if set to the top of
the ON file is also boot, then the device power supply for the external electricity (Also for
the battery charge), then the charger should be connected and plugged into the socket.
The OFF file is powered off.
After power on, the blue power indicator at right side of the "window" will light
，
Then
blowing on small round hole in the skylight, the machine can trigger, "door" will issue two
ultrasonic waves, lasts for 8 seconds. And the red light on the left of" window" will lit (Fig
2). Switch to OFF file is off; The leftmost SENSITIVITY in the cover is the sensitivity
handle. left turn down, right turn up. The factory has been transferred to the appropriate
location, if not necessary, please do not arbitrarily adjusted.
