Serpent SRX8 GT TQ, Instruction Manual, Page: 18 / 56

BAG 7
18
STEP 25
After building the differential with
new gears, new differential case and
bearings, the diff may feel a little tight.
The connected parts need at least an hour
run-time to create a perfect match. Attention:
When you assemble the diff with too much
initial play, the gears will not run-in properly
and may wear quickly. After 1 or 2 hours of
running the car, re-check the gear-mesh
between the ring gear and the pinion. All parts
should have run-in properly now. You may add
or remove 8x11x0.1 shims as needed.
8x16x5
8x11x0.2
5x13x4
M5x4
8x16x5
5x13x4
M5x4
1
2
3
3
,1'5,9(%5$&.(76 &+$57
LOW
MID
HIGH
HIGH
MID
LOW
Assemble the indrive bracket accordingly to the diff insert assert
mouted in the step 18.
M3x10
M3x20
M3x20 M3x10
8x11x0.2
25.2 25.1