33
Nut M4 Flanged
1- Cut the body along the cutting line with special
scissors (not included). Make holes for the
bodypost and antenna as needed with a body
reamer (not included).
2- Before painting the body, apply the precut masking sheet
elements to the inside of the body. Follow the cleaning &
painting instructions supplied by the polycarbonate paint
supplier you choose.
3- Apply the Serpent and SRX2-Gen3 logo-decals on the
body and wing.
1- Rims included in the kit.
2- Rubber tyres not included in the kit.
3- Be sure to glue your rubber tyres to the
wheels using Cyanoacrylate glue.
Body Clip
STEp 46
Nut M4
Flanged
Summary of Contents for SRX2 GEN3 CARPET
