Page
17
Page
16
STEP
33A
STEP
33B
STEP
34
ELECTRONICS ASSEMBLY
NOT INCLUDED
Tip: Use double sided
tape to mount the ESC
and RX to the chassis.
Electronics configuration option A
NOT INCLUDED
Tip: Use double sided
tape to mount the ESC
and RX to the chassis.
Electronics configuration option B
M3x20
2
1
Bag
10
STEP
35
STEP
36
STEP
37
M3x16
NOT
INCLUDED
Battery pad thick
Battery pad thin
NOTE: WEIGHT BALANCE
To adjust the weight balance, move
the batterypads accordingly, more
front or backwards as needed.
M3x12
M3x3
Nut M4 flanged
NOTE:
- Rims included
in the kit
- Rubber tyres
not included in
the kit
- Be sure to
glue your rubber
tyres to the
wheels using
Cyanoacrylate
glue
1
2
3
1
2
NOTE:
Two sets of wing angle platforms
available in the kit, 2 and 4 degrees.
Please match them and assemble
them in the same orientation.
Wing platforms
(2degrees) default
orientation detail view.
FINAL ASSEMBLY
BODYSHELL:
1) Apply the masking sheet provided
and paint the body on the inside.
2) Cut the body along the provided
cuttinglines on the body for a perfect
fit. Same for the body mounting
holes.
3) Remove the body protection film
on the outside of the body.
4) Apply the provided Serpent and
Spyder decals, and mount the body
on the bodyposts, with the provided
bodyclips.