Serpent Model Racing Cars BV SPYDER SRX2 MH, Instruction Manual

Page: 28 / 46

28
STEp 36 STEp 37
36.2 36.1
SHOCKS LENGTH:
Measure the
shock length fully extended.
FRONT REAR
20.5
mm
28.5
mm
M2.3x4
1- Fill up with sillicone oil
fully using the silicone
oil supplied in the kit.
For the correct cst value
please check the default
setupsheet.
2- Extend the shockrod fully
3- Move the shockrod
slowly up and down
to let ALL air bubbles
escape.
4- Apply the gasket and
cap and close fully.
1-Bleed: push the shock-
rod all the way in slowly,
to allow excessive oil to
escape.
2- With shockrod fully
in, mount the o-ring and
screw.
Assemble the spring and spring-
cup (align correctly) to complete
the shock.
SPRINGS CUPS
FRONT
HIGH
REAR
LOW
M2.3x4