14
SP25VDE OM 2.0-1(2006)
BASIC OPERATION
Before proceeding with operating the SeriPrinter. The following important points
should be observed.
1.
Installation.
The SeriPrinter installation procedure must have been complete by a trained
service technician using the SP25 installation manual.
2.
SeriDrums.
Only SeriDrums should be used in the Digital Duplicator when a SeriPrinter
has been installed.
• SeriDrums are identified by a red drum handle.
• SeriInk is light and heat sensitive. Store in a cool dark place.
•
DO NOT EXPOSE A SERIDRUM TO DIRECT SUNLIGHT.
• When a SeriDrum is not in use, it should be stored in its box.
• A SeriDrum should never be left without a master whether it is in the Digital
Duplicator or in a box. This will increase the life of the screens on the drum.
• When a SeriDrum will be stored for a period longer than 5 days, unclamp
the section of the master material secured by the clamp.
• When a SeriDrum will be stored for a period longer than 4 weeks, make a
a master with no image on the drum and unclamp the section of the master
material secured by the clamp.
3.
Operation.
1.
Follow the power ON sequence for the SeriPrinter detailed in the previous
section. Printing can commence once the display panel indicates machine
status :
READY
3. Set the paper exit tray to the paper size in the duplicator paper feed tray.
4.
Insert a SeriDrum into duplicator. Refer to the Digital Duplicator’s operators
manual for correct insertion and removal of a drum.
5.
Refer to the Digital Duplicator’s operators manual for Preparation and Stand-
ard Printing Operation.
6. Follow the power OFF sequence when printing is complete. Detailed in the
previous section.
