2.3.2 Rear Panel
The figure below shows the rear panel of the router.
DC IN
The Power socket is where you will connect the power adapter.
RST:
With the router powered on, press and hold the button until the CPU
LED becomes quick-flash from slow-flash. And then release the button and
wait the router to reboot to its factory default settings.
RST/WPS
WPS:
If you have client devices you can press this button to quickly establish
a router and client devices and automatically configure wireless security for
your wireless network.
WAN
This port is where you will connect the DSL/cable Modem, or Ethernet.
1/2/3/4 LAN
This port connects the router to local PC.
Note: Press and hold RST/WPS button for about less than 5 seconds and the CPU LED indicator
changes its lighting, it is WPS working. If more than 5 seconds and the CPU LED not response, the
router will reboot to default factory settings.
5
Summary of Contents for SRX-WR150WH
Page 1: ...SRX WR150WH...
Page 2: ......
