High Definition range
Heavyweight
Lightweight
Diagram 1
Diagram 2
Stay-put
Flexible Arm
Stay-put
Flexible Arm
Standby Switch
Standby Switch
Heavy stay-put
Base
Dimmer Wheel
Standby Switch
Getting Started
Your High Definition Light is ready to plug
in and use.
To operate the light, use the standby switch
located back of the handle on the light head.
When OFF the switch glows red
(Diagram 1 inset).
Positioning
Your light is designed to help you easily
direct the beam just where you need it.
It is equipped with a swivel joint at the lamp
head and a robust, flexible, stay-put arm
for fine positioning.
Dimmer & Diffuser Kit
Remembers your last setting. The dimmer
is operated by a wheel located on the back
of the lamphead (Diagram 2 inset). If you’d
prefer a wider spread of light then you can
use the diffuser kit supplied with your light.
Standby Mode
It is normal to leave the light on standby
when not in use. When in standby mode
it will consume less than 0.5w. The High
Definition Light is not designed to be
opened so please do not attempt to tamper
with it.
Standby Switch
Stay-put
Flexible Arm
Standby Switch
Stay-put
Flexible Arm
Lightweight
Easy to Move Base
