11
9. Install pedals
o
The end of each pedal is marked
with either an “L” or “R”,
indicating the side of the bike as
seen by the rider when seated on
the bike.
o
The Left pedal has 3 lines on the
pedal spindle. The Right pedal
spindle is smooth.
o
The Left pedal is reverse
threaded, or left-hand threaded.
o
Tighten using multi-tool. Finalize
tightening with a pedal wrench
(not supplied) to 35Nm
10. Install seatpost
o
Loosen clamp screw using multi-
tool
o
Insert seatpost to desired height
(see FIT section for additional
direction)
o
Tighten to 6 Nm using torque tool
EN
