7
Using Remote Control Unit
Install/Replace the Remote Control Battery
The remote control battery is already installed at the
factory. When the remote control stops operating or
its range seems reduced, replace the battery with
new one.
1.
The battery door is located on the back end of the unit.
2.
Squeeze notched tab A while pulling battery door latch B to release the battery door latch and take out the battery holder.
3.
Insert a “CR2025” 3 volt lithium battery. Make sure the polarity (the + and – side of the battery) is correct.
4.
Replace the battery holder back in the remote control.
Summary of Contents for iH-100
Page 26: ...25...
