4
Assembly
1.
Turn the small barrel (2) upside down and using the screws provided attach the large
panel (4) securely.
2.
Connect the tubing to the water pump (7) and place in the bottom of the large barrel (1).
3.
Place the small barrel with the large panel attached on the top of the large barrel (1).
Make sure that the electrical cable is fed out the back and the pipe (7) is fed up though
the barrels. Secure the barrel in place using screws provided.
4.
Screw the pump handle (6) to the pump base (5).
5.
Place the small panel (3) on the top of the water feature, making sure the tubing is fed up
through the hole. Secure into place using the screws provided.
6.
Connect the tubing (7) to the water pump and secure the water pump on the base of the
water reservoir.
7.
Fill the large barrel with cold tap water.
8.
The water feature is now ready to be plugged in to a power source and be used.
9.
Once the water starts flowing, add more water to the large barrel as needed to ensure
that the pump remains submerged.
Care and maintenance
•
Keep water clean and free from debris.
•
Clean the water feature periodically to prevent build-up of mineral deposits on the sides
and base. Use a stiff brush and clean warm water with a little liquid soap. Do not use
detergents or abrasives as this will damage the surface of your water feature.
•
Serenity recommends using Fountain fresh liquid to prevent the build-up of algae and
reduce maintenance. To order simply call our dedicated customer service number on
0871 911 7003 and quote the code G4025 or visit us online at www.clifford-james.co.uk.
