5
Water flow adjustor
7.
Fill the water reservoir with clean, cold tap water, ensuring that the water pump is fully
submerged.
8.
Connect the pump cable to the adaptor plug then plug into a suitable power supply and
switch it on.
9.
Once the water starts flowing, add more water to the water reservoir as needed to ensure
that the water pump remains submerged.
10.
If you would like to adjust the flow of the water, turn the flow adjusting dial on the water
pump.
Care and maintenance
•
Keep water clean and free from debris.
•
Clean the water feature periodically to prevent build-up of mineral deposits on the sides
and base. Use a stiff brush and clean warm water with a little liquid soap. Do not use
detergents or abrasives as this will damage the surface of your water feature.
•
Serenity recommends using Fountain fresh liquid to prevent the build-up of algae and
reduce maintenance. To order simply call our dedicated customer service number on
0871 911 7031* and quote the code G4025 or visit us online at
•
When you need to replace the lightbulb, simply twist off the plastic globe and unscrew
the old lightbulb. Then insert a 3-watt screw in bulb and reattach the plastic globe.
