www.SereneLifeHome.com
5
3.
The shoulder straps of the harness can be set at two different heights. Partially
remove the sack (fig. a), release the shoulder straps from the backrest (fig. b1)
and pull them out from the sack (fig. b2). Insert the ends of the shoulder straps
in the other slots in the sack and the backrest (fig. c), then put the sack back
into the right position on the backrest.
4. BRAKE:
The brake on the seat is always applied. To move the seat, keep both
buttons held down.
5. RECLINER-SWING:
Before placing the high chair in the recliner-swing mode,
remove the tray (fig. a) and the white cylindrical plastic parts from the leg
divider. Then insert the protect front bar into the leg divider (fig. b). Finally, use
a screwdriver to tighten the screws to secure the front bar (fig. c).
6. SWING:
To transform the chair into a swing, place the seat in the lowest position
(fig. a) and press the red buttons on the inner part of the uprights, pushing
them upwards (fig. b). Swing mode (fig. c).
7.
To put it back in recliner or high chair mode, make sure that the side uprights
of the seat are parallel with those of the frame (fig. a), then press the red buttons
and push them downwards (fig. b).
HIGH CHAIR
8. FOOTREST:
Lower the footrest (fig. a), press the two side buttons at the same
time (fig. b) and select one of the three available heights.
9. TRAY:
To fit the tray, pull the central lever underneath it towards you while at
the same time pushing it all the way into the armrests (fig. a).
To extend or remove the tray, pull the central lever underneath it towards you
(fig. b) and move it outwards (fig. c). According to the baby body to adjust the
2-position trays. The high chair has a double tray. The top tray can be easily
washed in a dishwasher (fig. d).
10. USE WITHOUT THE TRAY:
To use the seat at the table, remove the tray.
11. ADJUSTING THE HEIGHT:
The seat can be set at 7 different heights. To lower
the seat, pull the two levers downwards (fig. a) and move it to the required
position. Holding the handle behind the backrest (fig. b) can also be used to
raise the seat.
WARNING
Fall Hazard:
This can’t be done with the child in the high chair. Don't use when
the horizontal height of the high chair is inconsistent.
Summary of Contents for SLHC63S
